Skip to content
‹ Back to IndustriesBuilding Management

A Damaged Roof Drain Cap Let Rain Pour Into a Nashville Hospitality Property

A damaged cap on a rooftop drain let rain pour into a Nashville hospitality property, according to BMS CAT Commercial Account Manager Sabrina Box. Her crew is removing wet materials and drying the building ahead of the rebuild. Box says much of this damage can be prevented with a walk of the property before a freeze or storm to find risk areas and fix them first.

This story was produced through MarketScale. See how Building Management teams put it to work with Customer Stories & Case Studies.

Promoted content from BMS CAT on MarketScale.

Water DamageDisaster RecoveryHospitalityStorm Preparation
Share

Key takeaways

01

A single damaged roof drain cap let rain pour into a Nashville hospitality property during a storm.

02

BMS CAT's recovery sequence: remove damaged materials, place dehumidifiers, dry the structure, then rebuild.

03

A pre-storm walk to find risk areas, roof drains included, can stop this kind of loss before it starts.

Free workspace

Turn your Building Management expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

It rained in Nashville, and the water came inside. A few days before this video was filmed, a damaged cap on a rooftop drain at one of BMS CAT's hospitality clients let the storm through, and it poured into the property below.

Sabrina Box, Commercial Account Manager at BMS CAT, walked the site the morning the recovery work was underway. The corridor behind her tells the story: ceilings opened up, walls cut back to the framing, plastic containment hung across the hallway, and drying equipment lined up along the carpet.

One small part, one big loss

Box traces the whole loss to a single component. "There was actually a pipe, a drain on the roof that the cap had become damaged," she says. "When it rained a few days ago, it was pouring rain inside of the property."

Roof drains do quiet, constant work on commercial buildings. Low-slope roofs have very little pitch, so they depend on internal drains, scuppers and downspouts to move water off the roof, and the Certified Commercial Property Inspectors Association notes that without proper design and maintenance, poor drainage can lead to accelerated deterioration and building leaks. The International Facility Management Association (IFMA) calls roof drains the first line of defense for flat and low-slope buildings, and an often overlooked one, recommending that facility teams keep strainers intact and confirm piping connections are watertight to prevent seepage inside the building.

What day one of the recovery looks like

By the time Box filmed, BMS CAT's crew had the job moving. "We have the demo process going, dehus placed, drying out everything so that we can get prepared for the rebuild," she says.

That order matters. Wet materials come out, dehumidifiers and air movers go in, and the structure is dried before anything is rebuilt. Speed is the point: the U.S. Environmental Protection Agency's guidance for commercial buildings frames water damage response around a 24 to 48 hour window, with the goal of drying materials before mold growth starts. The same guidance says wet ceiling tiles should be discarded and replaced, and that wallboard can sometimes be dried in place when there is no obvious swelling.

The better job is the one that never happens

For Box, the cleanup is only half the message. She says there are many ways BMS CAT can help prevent damage like this before it ever happens.

BMS CAT works from an emergency preparation checklist ahead of a freeze or any storm. Box describes it in three steps:

  • Walk the property.
  • Find the potential risk areas.
  • Deal with them before the storm.

Find any potential risk areas, and deal with them before the storm so that we don't have such a bad accident post the storm. — Sabrina Box, Commercial Account Manager, BMS CAT

Putting roof drains on the walk

This loss started on the roof, which makes drainage a natural first stop for any pre-storm walk. Published guidance for commercial roofs points to a short list of checks:

  • Keep roof drains, scuppers, gutters and downspouts clear year-round, and clear leaves, sticks, dirt and other debris before storms (Insurance Institute for Business & Home Safety).
  • Make sure drain strainers are intact and free of blockages, and that piping connections are watertight (IFMA).
  • Look for standing water, debris and damaged membrane on flat roofs (IBHS).
  • Check the underside of the roof or the drop ceiling for water stains or mold (IBHS).
  • Inspect and clean drains in the fall and after major storms, when debris builds up, and schedule drain work alongside regular roof inspections (IFMA).
  • Keep records of inspections, maintenance and repairs, with photos and contractor reports, for warranty and insurance purposes (IBHS).

Freeze season adds a reason to do this now. IFMA lists ice alongside leaves and sediment as something that can clog roof drains and lead to ponding, membrane damage and costly leaks.

Following the work from the field

This Nashville job is one of the field updates BMS CAT is sharing from active sites, and the team says it will keep following more jobs. Property and facility teams that want help walking a building before the next freeze or storm can reach BMS CAT at 866-787-3521.

BMS CAT

Part of this channel

BMS CAT

70 years of disaster recovery expertise, from emergency response to full rebuild.

Visit the channel

Your experts belong here

Every story in MarketScale Building Management starts with a company putting its facilities engineers, energy managers, and service technicians on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners and facilities teams pick on trust, and your engineers turn that trust into inbound conversations.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Building Management, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Building Management: are you visible to AI?

Before they reach out, Building Management buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Building Management expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your facilities engineers, energy managers, and service technicians into the articles, video, and social content Building Management buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Building Management Insights

R-Zero signs 5.5 million square feet for AI that tunes existing HVAC systems

R-Zero signs 5.5 million square feet for AI that tunes existing HVAC systems

R-Zero signed 5.5 million square feet for its Continuous Building Savings platform in about three months, with Mayo Clinic among the customers. The AI reads existing building management systems and occupancy data to find control errors without new equipment. Early results point to old programming as the savings source.

  • 01Every building R-Zero had audited carried errors in its control programming, so the first savings in many buildings may come from settings written at commissioning rather than from new equipment.
  • 02Reported results vary with occupancy: about 30% HVAC savings in hospital office zones that sat empty roughly two-thirds of the time, against independent modeling near 22% for a typical office.
  • 03Ask any AI building vendor whether a headline number is opportunities identified or savings measured, because a 30-day figure and a 60-day figure can describe two different things.

Nov 20, 2026

Why NAPCO designs access control for dealers short on trained technicians

Why NAPCO designs access control for dealers short on trained technicians

NAPCO Security Technologies designs its MVP cloud access control platform for dealers short on trained technicians, with one QR scan enrolling a panel. Selling the upgrade is harder. Capital cost, subscription worries and unawareness that key fobs copy easily keep many customers on legacy systems.

  • 01A platform that runs one door or thousands lets a dealer train a technician on one product and sell that skill on every job size, which makes setup time a real line in what a system costs.
  • 02Copyable key fobs are an upgrade argument many customers have never heard, so the security education belongs before the price quote.
  • 03Legacy systems that still open doors can impose ongoing labor costs for badge changes, access removals and audit prep; as editorial advice, tracking those tasks and hours can help compare hidden labor to a subscription quote, though the calculus may differ for low-change, single-site environments.

Nov 19, 2026

Layout and exhaust choices changed modeled infection risk nearly tenfold in an ABSL-3 lab

Layout and exhaust choices changed modeled infection risk nearly tenfold in an ABSL-3 lab

A Building and Environment study compared two ABSL-3 labs built to the same biosafety standard and ventilation specifications but with different equipment layouts. The A12-UL setup (double-sided dispersed layout with upper supply and low exhaust) showed a breathing-zone infection probability nearly an order of magnitude lower than A10-UU (single-sided centralized layout with upper supply and upper exhaust). The findings suggest that moving or installing equipment can change exposure conditions even when air change rates and ventilation parameters are unchanged.

  • 01The ventilation scheme that cleared suspended aerosol fastest overall was not the one that steered it out most directly, so a single decay or air-change figure can miss where exposure actually happens.
  • 02Floors and downstream walls collected the most bioaerosol, and which wall counts as downstream can change whenever a cage rack, cabinet or exhaust grille moves.

Nov 19, 2026

Explore More Building Management Insights

Read more expert perspectives from across Building Management.

Browse Building Management Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Building Management and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512